Sr20Det Cam Dowel. This long pin is there to engage the. Cams for sr20's usually come with the short dowel pin, which drops right in the motor. The only difference is a dowel pin. That means on the intake cam (the cam closer to the firewall) the dowel pin should be at 10 o'clock and the exhaust dowel pin should. We specfically chose the tomei pon cams stage 1 cam set since it. There are a large range or cam specs available for the sr20det ranging from 258 duration with 11.5mm of lift all the way up to over 272. The rwd oem intake cam uses a short dowel pin and the exhaust cam uses a long dowel pin. Rebuild an sr20det cylinder head. Recheck the cam timing, the crank should be on the tdc mark, the exhaust cam dowel should be at 12 o’clock and the intake cam dowel should. You will want the dowel pin on the exhaust cam pointing straight up, and the dowel pin on the intake cam pointing to about the 10.
from www.kakimotor.com
There are a large range or cam specs available for the sr20det ranging from 258 duration with 11.5mm of lift all the way up to over 272. Cams for sr20's usually come with the short dowel pin, which drops right in the motor. The only difference is a dowel pin. We specfically chose the tomei pon cams stage 1 cam set since it. That means on the intake cam (the cam closer to the firewall) the dowel pin should be at 10 o'clock and the exhaust dowel pin should. The rwd oem intake cam uses a short dowel pin and the exhaust cam uses a long dowel pin. Rebuild an sr20det cylinder head. This long pin is there to engage the. Recheck the cam timing, the crank should be on the tdc mark, the exhaust cam dowel should be at 12 o’clock and the intake cam dowel should. You will want the dowel pin on the exhaust cam pointing straight up, and the dowel pin on the intake cam pointing to about the 10.
Nissan Silvia SR20DET Works Engineering Adjustable Cam Pulley (1pcs)
Sr20Det Cam Dowel You will want the dowel pin on the exhaust cam pointing straight up, and the dowel pin on the intake cam pointing to about the 10. That means on the intake cam (the cam closer to the firewall) the dowel pin should be at 10 o'clock and the exhaust dowel pin should. The only difference is a dowel pin. Rebuild an sr20det cylinder head. There are a large range or cam specs available for the sr20det ranging from 258 duration with 11.5mm of lift all the way up to over 272. We specfically chose the tomei pon cams stage 1 cam set since it. You will want the dowel pin on the exhaust cam pointing straight up, and the dowel pin on the intake cam pointing to about the 10. The rwd oem intake cam uses a short dowel pin and the exhaust cam uses a long dowel pin. Recheck the cam timing, the crank should be on the tdc mark, the exhaust cam dowel should be at 12 o’clock and the intake cam dowel should. This long pin is there to engage the. Cams for sr20's usually come with the short dowel pin, which drops right in the motor.
